Saving and Recalling a Scene using the Front Panel

Saving and Recalling a Scene using the Front Panel on the 16×16 HDMI Matrix Switch

In this video, we’re going to take a look at how to save a scene using the front panel. This is the 16-by-16 HDMI matrix switch.

So the first thing you want to do is set up your inputs and outputs that you want to save. So I’m going to say 1 goes to 1 and 2, 2, 3 and 4, 3, 5 and 6, 4, 7, 8, and so on. I’m just going to go down the line. Now that I have my inputs and outputs and how I want to save them, I’m going to select the save button. And I’m going to select the number 1 and then enter. Now from here, I’m going to change my input, so I’m going to select one and then go to All Outputs, so I’m going to press 1. So now I have input 1 going to All Outputs. And now let’s recall the scene that we saved. I’m going to press Recall, then number 1, and then Enter. And if I go back to input 1, I can see it’s going to 1 and 2, 2 to 3 and 4, and so on.

If you have any questions, give us a call at 833-965-3722.

Saving and Recalling a Scene using the Front Panel

Related Posts:

Info

Pages

Categories