Saving and Recalling a Scene using the Web GUI

Saving and Recalling a Scene using the Web GUI on the 16×16 HDMI Matrix Switch

In this video, we’re going to take a look at how to save and recall scenes using the web GUI. This is for the 16-by-16 HDMI matrix switch.

So first I’m going to log in, and by default that’s admin, all lowercase. Now from there, you see I have input one going to all outputs. So let’s put two and go out to two, six, 10 and 14, three out to three, seven, 11 and 15, and input four out to four, eight, 12 and 16. Now to save this, I’ll just select save, and where I want to save it, I’m going to save it as number one. Now I can caption that, and let’s just say scene one and then submit. And if I go back to the home page, let’s say 16 goes to all outputs. Now there are no outputs receiving signals one, two, three, or four. So now let’s just recall the scene. I’m going to select scene one. Now 1 is getting 1, 5, 9, and 13. 2 is 2, 6, 10, and 14. 3 is getting 3, 7, 11, and 15. And 4 is getting 4, 8, 12, and 16.

If you have any questions, give us a call at 833-965-3722.

Related Links:

4K 30 Hz 16×16 HDMI Matrix Switch with Apps & WEB GUI

4K 30 Hz 16×16 HDMI Matrix Switch with Apps & WEB GUI | Manual