Use WolfPack Keypads with your WolfPack Matrix Switchers
Here are YouTube demo videos for using our 10-Button Keypad for WolfPack Matrix Systems.
About Kent Christian
This author has not written his bio yet.
But we are proud to say that Kent Christian contributed 118 entries already.
Entries by Kent Christian
What is EDID and why is it so important with WolfPack HDMI Matrix Switchers?
/by Kent ChristianWhy do we need to learn about EDID? When we statistically and analyze the problem that the signal source is not displayed on the terminal display when the customer uses the HDMI matrix switcher and HDMI extender, most of the reasons are caused by EDID. Then, what is EDID? EDID: Extended Display Identification Data: Refers to […]
What is PoE (Power over Ethernet) and PoC (Power over Cable)?
/by Kent ChristianPower-over Ethernet (PoE), Power-over-Cable (PoC) and now Power-over-HDBaseT (PoH) are all based on the same basic principle of simultaneously providing both data signal and power from one device to another over the same cable. HowToAV takes a look at how each one differs and the benefits of PoE powered devices. What is Power-over-Ethernet? Power-over-Ethernet (often referred […]
WolfPack Modular Matrix Switcher YouTube Demo Videos
/by Kent ChristianHere is YouTube demo videos for Modular Matrix Switcher.
Fixed Matrix Switcher YouTube Demo Videos
/by Kent ChristianHere is YouTube demo videos for Fixed Matrix Switcher.
Get Tips and Demo Videos for WolfPack AV Over IP Systems
/by Kent ChristianHere are YouTube demo videos for WolfPack AV over IP Systems.
Video Wall Processor YouTube Demo Videos
/by Kent ChristianHere is YouTube demo videos for Video Wall Processor.
Use UDP & TCP Client and RS232 to control Modular Matrix Switchers
/by Kent ChristianThe modular matrix switcher series can support the UDP & TCP and Serial/COM port control, please see the steps in as below: These steps work with the below product lines. These codes do not work on another matrix switch https://www.hdtvsupply.com/wolfpack-lite-hdmi-modular-matrix-switchers.html UDP Users will need to make sure the control PC and the matrix switch are in the […]
Use HEX Codes with WolfPack Modular Matrix Systems
/by Kent ChristianHDTV Supplys WolfPack HEX codes are a six-digit, three-byte hexadecimal number used in HTML, CSS, SVG, and other computing applications to control our WolfPack Modular Matrix Systems. Here is an example: Q: If you want to write 32 or 26 is the ASCII command 32 or 26 when programming> Also for HEX, if you wanted to […]